Plasticizers | ExxonMobil Product Solutions
DTDP plasticizer. Jayflex DTDP plasticizer is the highest-molecular-weight phthalate plasticizer, providing greater performance at high temperatures. It is the preferred plasticizer for automotive cable applications and THHN/NMB electrical wire insulation. Learn more.
Mesamoll | The universal plasticizer | LANXESS
Their viscosity–temperature curve is very flat. These plasticizers with special good resistance to low temperatures are used whenever a plasticized polymer is required to have high flexibility even at sub-zero temperatures. Typical low temperature plasticizers include Adimoll adipates, Uniplex sebacates and Disflamoll TOF. Compatibility
Plasticizers from Evonik - Evonik Industries
Plasticizers from Evonik offer manufacturers of flexible PVC and their products flexibility, safety and above-average technical performance with a consistently high level of quality. Plasticizers act like a molecular lubricant: The molecules sandwich themselves between the polymer chains of PVC. This makes the originally tightly-packed, rigid
Plasticizers: Types, Uses, Classification, Selection & Regulation
Plasticizers are most often used in PVC, the third largest polymer by volume after PP and PE. In turn, PVC is used in a wide range of products. Examples include: Unplasticized PVC (or rigid PVC) is used in applications such as pipes, siding, and window profiles.
Plasticiser loss from plastic or rubber products through
Polymers experience degradation during storage and service. One of the main degradation mechanisms of plasticised-polymer products is the loss of plasticiser, which leads to poorer mechanical
- What are plasticizers used for?
- Plasticizers are the major functional additives transforming the physical properties of polymers such as PVC, PU, acrylic, nitrile and rubbers to create a whole world of flexible and durable finished articles for high demanding applications. The world plasticizer consumption was around 7.82 million MT in 2017, up nearly 25% over 6 years .
- What is a plasticizer chemistry?
- Plasticizers are the most used additives in the plastics industry. They are generally available as non-volatile, colorless liquids. They improve the properties of the polymer. With several plasticizer chemistries available in the market choosing the right one can be daunting. In this guide, you will read more about:
- What is a polymeric plasticizer?
- Polymeric plasticizers are typically made from aliphatic dibasic acids such as adipic acid and diols. They are primarily valued for their permanence. These plasticizers are generally classified as polyesters, not adipates. Many have low solvency for PVC and high viscosity. Both these factors can make processing f-PVC compounds difficult.
- What is a primary plasticizer?
- A primary plasticizer enhances elongation, softness and flexibility of polymer. They are highly compatible with polymers and can be added in large quantities. For example: up to 50% of vinyl gloves are made up of plasticizers, which make the PVC flexible and soft enough to wear.
- What are the different types of plasticizers?
- There are two main groups of plasticizers: Internal plasticizers are part of the PVC molecule (where a second monomer is copolymerized into the polymer structure). Internal plasticizers have generally too narrow of a temperature processing range to be useful.
- What are natural product type plasticizers?
- Vegetable oil derivatives are the most widely used natural product type plasticizers. Products consisting of triglyceride esters of unsaturated fatty acids (e.g., soybean oil, linseed oil) in which the double bonds in the fatty acid residues have typically been epoxidized have been commercial products for decades.
