MasterGlenium 3030 | Master Builders Solutions - North America
MasterGlenium 3030 admixture meets ASTM C 494/C 494M requirements for Type A, water-reducing, and Type F, high-range water-reducing, admixtures. Recommended uses of MasterGlenium 3030 concrete superplasticizer: Concrete where high flowability, high-early and ultimate strengths and increased durability are needed; Self-consolidating concrete
SikaPlast PC-10 | PCE based Super-plasticizers
SikaPlast PC-10 is a polycarboxylate based superplasticizer particularly formulated for the production of precast concrete elements, targeting its special demands regarding slump retention, very low water/binder ratios, use of double or triple blend mixes (cement, GGBFS, PFA and/or microsilica) and a high degree of compaction. Suitable for use in hot and tropical climatic conditions.
Superplasticizer I Concrete admixtures I Super plasticizer
We recommend to start with 1% by cement weight, then lower the dosage as needed. How to mix with Cementitious Material: Mix concrete/cement with plasticizer for a few minutes, then add water (mix at least 3-5 minutes). You can also add Super plasticizer to the water 10-15 minutes prior to casting (until plasticizer dissolves in water), then mix
Selection of Superplasticizers for High-Performance Concrete
Selection of Superplasticizers for High-Performance Concrete Home / Concrete Technology / Concrete Admixtures Reading time: 10 minutes Superplasticizers are used to fluidify the concrete in the field. Most of the superplasticizers helped to maintain high slump values for a time of 30 to 45 minutes.
Effect of Superplasticizers to Enhance the Properties
The experiments were classified into two phases: the first phase focused on the effects of superplasticizer admixture on workability and compressive strength, and the second phase determined...
- Which superplasticizer is best for precast concrete?
- PANTARHIT® F (FM) is a superplasticizer with accelerating properties suitable for producing ready-mix and precast concrete. PANTARHIT® FT100 (FM) is a high performance superplasticizer for producing high consistency concrete at low water/cement ratios in precast concrete plants.
- What is masterglenium 3030 admixture?
- MasterGlenium 3030 ready-to-use full-range water-reducing admixture is a patented new generation of superplasticizers based on polycarboxylate chemistry. MasterGlenium 3030 admixture is very effective in producing concretes with different levels of workability including applications that require the use of self-consolidating concrete (SCC).
- Can polycarboxylate based superplasticizer improve the crack resistance of concrete?
- The polycarboxylate based superplasticizer can improve the crack resistance of concrete. After adding an appropriate amount of water reducing agent in concrete, the internal structure of the concrete can be improved and the contraction and cracking of concrete can be reduced.
- What is a polycarboxylate ether superplasticizer?
- The polycarboxylate ether superplasticizer is an additive commonly used in concrete engineering and has a wide range of applications. The PCE based admixture can significantly reduce the amount of cement and improve the fluidity and pumpability of concrete while ensuring the strength and durability of concrete.
- What is superplasticizer?
- Free-flowing, spray dried powder of modified polycarboxylic ether. Superplasticizer is especially optimized for plastification and water reduction of cementitious construction materials. Superplasticizer provides an excellent development of early strength.
- What are the advantages of polycarboxylate based superplasticizer?
- Low dosage and high water reduction rate. The water reduction rate of polycarboxylate based superplasticizer can be as high as 45%, which can be used to prepare high-strength and high-performance concrete. Small loss when slump is light.
