China Alternative Plasticizer For DOP And DBP Manufacturers
Product Details Alternative plasticizer for DOP and DBP (EFAME) Product introduction： Epoxy fatty acid methyl ester is a light yellow liquid at room temperature. It is a new environmental plasticizer with fatty acid methyl ester as the main raw material. It is a non-toxic and tasteless plasticizer and stabilizer for PVC.
Effects of bio-based plasticizers on mechanical and thermal
Epoxy fatty acid methyl ester is another promising new alternative plasticizer because of its low toxicity and partial biodegradability, and because it is mainly produced by modifying natural products (Fenollar et al. 2009a), such as rubber seed oil, soybean oil (Karmalm et al. 2009), and sunflower oil (Bouchareb and Benaniba 2008).
Efame /Epoxy Fatty Acid Methyl Ester /Replace DOP/DBP
EFAME /Epoxy Fatty Acid Methyl Ester /Replace DOP/DBP Product: Dioctyl Phthalate 99%-99.5% Properties: colorless oily liquid, specific weight 0.9861 (20/20), -55 melting point, boiling point 370 (pressure), does not dissolve in water, soluble in ethanol, ether, mineral oil, most of the organic solvents
DOP & DBP Alternatives/ PVC Plasticizer J101/103-23-1
EPOXY FATTY ACID METHYL ESTER Standard: accordant to Q/JAAO2012-018 Usage and Dosage: Jointly used with polyester plasticizers, it can reduce their mobility, while with metal heat stabilizers, it would greatly enhance their stability, and the dosage of these metal stabilizers necessary can be reduced to only one third of that used alone.
epoxidized fatty acid methyl ester ( efame) manufacturer
Epoxy fatty acid methyl ester is a new type of plasticizer which can be effectively replace DOP or DBP.with good compatibility with PVC,low volatility,good stability to heat and light effect,it can be applied to all of PVC plastic products,it can be used in PVC film or artificial leather processing performance.the products are also widely used in
- What is epoxy fatty acid methyl ester?
- Epoxy Fatty Acid Methyl Ester (EFAME),directly made from natural plant oil through etherification and epoxidation, is a kind of environmental epoxy plasticizer. It has very good process ability to PVC products with low cost, and it can partial or even totally replace phthalate plasticizer for PVC products.
- What are epoxide groups in efame?
- EFAME contains epoxide groups, which are cyclic ether rings introduced by reacting fatty acid methyl esters with oxidizing agents. This contrasts with general Fatty Acid Esters, which are simply esters formed from fatty acids and alcohols without any specific functional groups. The chemical reactivity of EFAME is also distinct.
- Is efame a good plasticizer for PVC products?
- It has very good process ability to PVC products with low cost, and it can partial or even totally replace phthalate plasticizer for PVC products. EFAME has the same plasticizing effect as DOP, its resistance of heat and volatility is better than DBP.
- What is epoxidized fatty acid methyl ester (efame)?
- Epoxidized fatty acid methyl ester (EFAME) is an important compound used across various industries. This article provides a detailed its physical properties, mechanism of action, comparison with other compounds, applications, and safety considerations. Eastman 2 MIN READ August 29, 2024
- Which is better efame or DBP?
- EFAME has the same plasticizing effect as DOP, its resistance of heat and volatility is better than DBP. And other performances are better than common secondary plasticizer too, such as cold tolerance, exudation, ultraviolet resistance, electrical property, etc.
- What is efame used for?
- In the coatings' industry, Epoxidized Fatty Acid Methyl Ester (EFAME) is used as a plasticizer and stabilizer in paints and coatings. As a plasticizer, EFAME improves the flexibility and workability of coatings, allowing for better application and adhesion to surfaces. It enhances the flow properties, which helps in achieving a smoother finish.
