Plasticizers Market Growth, Trends | Industry Analysis 2030
Plasticizers Market Statistics – 2030 The global plasticizers market was valued at $14.7 billion in 2025, and is projected to reach $22.0 billion by 2030, growing at a CAGR of 4.1% from 2025 to 2030.
Mesamoll | The universal plasticizer | LANXESS
Mesamoll has a low dissolution temperature of about 120 degree C and is an efficient primary and secondary plasticizer for PVC. In addition, Mesamoll is a versatile plasticizer demonstrated by divers usability, including PUR sealants and adhesives, in acrylates for metal coatings and in NBR rubbers.
Epoxies - Reactive Prepolymers | Valtris Specialty Chemicals
Secondary Heat Stabilizers & Plasticizers Lankroflex & Plas-Chek epoxidized soybean oil (ESO), Lankroflex epoxidized linseed oil (ELO) and Lankroflex ED6 are secondary heat stabilizers that are used in a wide variety of flexible PVC formulations.
Plasticizers: Types, Uses, Classification, Selection & Regulation
Secondary plasticizers are variously used for: Cost reduction Viscosity reduction Solvency enhancement Surface lubricity augmentation, and Low temperature property improvement Extenders are a subset of secondary plasticizers. They are commonly employed with primary plasticizers to reduce costs in general purpose flexible PVC.
Secondary Plasticizers - Mahavir Group
It is used as a secondary plasticizer and stabilizer in PVC plastics. Soybean oil is one of the most readily available and lower-cost vegetable oils in the world. Due to its low cost non-toxic and environmentally friendly properties, as well as its biodegradability over traditional phthalate plasticizers, ESBO is replacing DOP in some applications.
- What is a primary plasticizer?
- A primary plasticizer enhances elongation, softness and flexibility of polymer. They are highly compatible with polymers and can be added in large quantities. For example: up to 50% of vinyl gloves are made up of plasticizers, which make the PVC flexible and soft enough to wear.
- What is a polymeric plasticizer?
- Polymeric plasticizers are typically made from aliphatic dibasic acids such as adipic acid and diols. They are primarily valued for their permanence. These plasticizers are generally classified as polyesters, not adipates. Many have low solvency for PVC and high viscosity. Both these factors can make processing f-PVC compounds difficult.
- Which phthalate is used as a plasticizer for PVC?
- DTDP is the highest weight dialkyl phthalate to be used as a plasticizer. It was widely used as a high temperature plasticizer for PVC until trimellitates came into existence. It needs high processing temperatures for compounding with PVC. Cost: Phthalates are used as PVC plasticizers since the earliest days of flexible PVC.
- How to choose a general-purpose plasticizer for PVC?
- While selecting a general-purpose plasticizer for PVC, the main attributes to be checked are: Among them, regulation is an important decision factor while selecting plasticizers. In recent years, there has been a lot of discussion on phthalate plasticizers. But in fact, not all phthalates are prohibited.
- Are polymeric plasticizers adipates?
- These plasticizers are generally classified as polyesters, not adipates. Many have low solvency for PVC and high viscosity. Both these factors can make processing f-PVC compounds difficult. Many have poor low-temperature properties and may be sensitive to moisture. Check out the table below for the benefits of polymeric plasticizers.
- What are natural product type plasticizers?
- Vegetable oil derivatives are the most widely used natural product type plasticizers. Products consisting of triglyceride esters of unsaturated fatty acids (e.g., soybean oil, linseed oil) in which the double bonds in the fatty acid residues have typically been epoxidized have been commercial products for decades.
