Plasticizers – Benefits, Trends, Health, and Environmental
Plasticizers are colorless and odorless esters, mainly phthalates, that increase the elasticity of a material (e.g., polyvinylchloride (PVC)). Plasticizers soften the PVC to make it flexible and bendable. This opens up a huge range of possibilities for new applications. One of the main benefits of plasticizers is the durability they confer onto
A highly stable bio-based plasticizer constructed
The plasticizing properties of LLMEE in PVC were tested and compared to the commercial plasticizers acetyl tributyl citrate (ATBC) and dioctyl phthalate (DOP). The results of optical performance showed that, compared to ATBC and DOP, PVC plasticized by 50 phr LLMEE had both high transparency and UV resistance.
Palatinol M
Palatinol M Light-stable plasticizer with very good solvent power for cellulose acetate and cellulose nitrate. Auxiliary plasticizer for surface coatings. Inhibitor for peroxides. Contacts Klaus Faller EMEA +49 621 60-59456 Send email Vivien Xu Asia Pacific +86 21 2039-1293 Send email Kerron Gabriel North America +1 346 252-4108 Send email
Plasticizer product range for a sustainable business
Palamollplasticizers are polymeric plasticizers based on adipic acid and comprise a range of different molecular sizes designed to provide outstanding technical performance. These polyesters serve as primary plasticizers and are most commonly used in flexible PVC.
Performance evaluation of new plasticizers for stretch PVC films
light transmission. The severalplasticizers inuenced the mechanical properties of the PVC lms to different degrees. All lms will probably show adequate performance when used in packaging applications. Nevertheless, the vegetable oil-based plasticizers showed better mechanical performance than the other plasticizers when compared to DEHA.
- Can Plasticizers improve the transparency of plasticized PLA films?
- Pasha et al. investigated plasticized PLA films with different plasticizer additions, including ethyl triacetate (TA) and PEG. The results demonstrated that plasticizer incorporation improved the transparency of the films while reducing light transmission compared to pure PLA.
- Does plasticizer incorporation reduce light transmission?
- The results demonstrated that plasticizer incorporation improved the transparency of the films while reducing light transmission compared to pure PLA. PLA-PEG films exhibited lower transmission in the visible region (660 nm) than PLA-TA films, with both plasticized films showing enhanced thermal stability.
- Do Plasticizers improve tensile strength and elongation of PLA films?
- The mechanical properties of the PLA film were significantly improved by the plasticizers, with the tensile strength and elongation at break of PLA-7% GT increasing from 0.44 MPa to 1.32 % to 1.08 MPa and 12.53 %. Moreover, the presence of these plasticizers markedly increased the enzymatic degradation rate of PLA films.
- What are plasticizers used for?
- Plasticizers are widely used in poly (vinyl chloride) (PVC), polylactic acid (PLA), thermoplastic starch (TPS), and other modified powder materials to enhance the flowability, flexibility, and processability of macromolecules.
- Can epoxidized Brazil nut oil be used as a plasticizer?
- Perez-Nakai and colleagues synthesized epoxidized Brazil nut oil (EBNO) as a plasticizer for PLA. The addition of 7.5 phr of EBNO to PLA resulted in a 70.9 % increase in elongation at break compared to unmodified PLA.
- Is ca a plasticizer for PLA?
- Their findings revealed that CA acted as a plasticizer for PLA, enhancing oxygen permeability across the PLA/CA film. The plasticized PLA film exhibited favorable barrier properties, releasing only simulants commonly found in fatty foods.
