SABIC - SABIC Dioctyl Phthalate (DOP)
SABIC Dioctyl Phthalate (DOP) DOP (Dioctyl Phthalate) is a combustible non-toxic colorless oily liquid with slight odor. Americas Asia Europe Greater China MEA. Download Documents Technical data. Compare. AMERICAS. ASIA. EUROPE. GREATER CHINA.
Performance assessment of polyvinyl chloride films plasticized with
The PVC films were synthesized (as per procedure mentioned in section 2.4.1) of various compositions of the epoxidized product (ECLO) and dioctyl phthalate (DOP), as shown in Table 2. The samples were characterized based on XRD analysis, thermogravimetric analysis, and mechanical properties. Table 2.
The role of chemical microstructures and compositions on the actuation
Another study illustrated that the presence of 5 phr BT and 10 phr dioctyl phthalate (DOP) was optimum to exhibit an actuation performance of 11% at a pre-strain of 10%. However, increasing the BT content further resulted in the agglomeration that inhibited the final actuation performance.
Detection of 2-ethyl hexanol and dioctyl phthalate with potentiometric
High response of 205.1 mV and 54.1 mV for room-temperature saturated vapors of 2-EH and DOP were achieved at 400 °C for ZnO nanorods-based sensor, which were 1.7 and 4.1 times higher than those of the ZnO nanoparticles-based sensor, respectively. Moreover, nanorods exhibited much better 2-EH and DOP selectivity when compared to nanoparticles.
5 Most important facts about Dioctyl phthalate (DOP)
Dioctyl phthalate (DOP), also known as diethylhexyl phthalate (DEHP), is an organic compound with the molecular formula C6H4 (CO2C8H17). Dioctyl phthalate, characterized by its molecular weight, high boiling point, and low vapor pressure, is one of the most widely used general emollients.
- What is dioctyl phthalate (DOP)?
- 1. Introduction Dioctyl phthalate (DOP) is one of the most widely used plasticizers with low volatility and high plasticizing efficiency. Although new product like dioctyl terephthalate is more recommended, DOP accounts for more than half of the market share for plasticizers.
- Can halogen-free deep eutectic solvent promote DOP synthesis in a biphasic system?
- In this work, the process intensification of reactive extraction strategy is proposed to promote DOP synthesis in a biphasic system, with the halogen-free deep eutectic solvent (DES) [Im:2PTSA] as dual solvent-catalyst.
- What is phthalic anhydride (PA) and 2-ethylhexanol (eh)?
- It has been generally utilized for the flexible polyvinyl chloride (PVC) plastic production owing to its low cost. DOP is traditionally synthesized by the catalytic esterification between phthalic anhydride (PA) and 2-ethylhexanol (2-EH) . The synthetic process includes two-step reactions of esterification: (1) (2)
- Where can I buy phthalic anhydride and p-toluenesulfonic acid?
- Materials Dioctyl phthalate, phthalic anhydride, 2-ethylhexanol, n-tridecane, choline chloride, imidazole, and p -toluenesulfonic acid are purchased from Adamas-beta (Shanghai, China) with purity above 99%.
- What is a high DOP yield after a three-stage reaction?
- At the condition of 130 °C (all reactors), 2-EH to PA mole ratio of 2.2 in PR, and DES mole fraction of 7.53 % (R1, R2 and R3), a high DOP yield of 98.61 % can be achieved after three-stage reactions. In Table 3, the composition of both phases in D1, D2 and D3 predicted by COSMO-RS were listed.
- What is the polarity of DOP?
- As exhibited in Fig. 3, the σ -profile of DOP is mostly distributed within the range of −0.0084 e/Å 2 < σ < 0.0084 e/Å 2 and only a weak peak exists near the non-polar region, suggesting its very weak polarity.
