Synthesis and application of high-stability bio-based
In this article, we prepared a high-stability bio-based plasticizer derived from ricinoleic acid through a four-step reaction and blended it with PVC to prepare samples. Taking commercial DOP and DOA as a comparison, we analyzed the mechanical properties, thermal stability, and migration resistance of plasticized PVC films.
DOP Plasticizer | Eastman
Eastman DOP Plasticizer (Bis (2-Ethylhexyl) Phthalate) is a light colored, low volatility, odorless liquid. It is the most widely used all-purpose plasticizer offered by Eastman for use with polyvinyl chloride (PVC) resins. It is insoluble in water and has a viscosity of 56 cP at 25°C.
Performance assessment of polyvinyl chloride films
Plasticizers are the compound, which reduce brittleness and add plasticity and flexibility to a synthetic resin. Conventionally, phthalates, citrates, adipates, and carboxylates are the most frequently utilized as plasticizers for polymers like polyvinyl chloride (PVC)owing to their excellent properties and low cost [1].
Plasticizers in Paint & Coatings: Uses, Types and Selection
Good stability to heat and ultraviolet light Broad range of compatibility, and Excellent resistance to hydrolysis Di-iso-octyl phthalate (DIOP) DIOP is like DOP, an all-purpose plasticizer for polyvinyl chloride, polyvinyl acetate, rubbers, cellulose plastics, and polyurethane. Di-iso-nonyl phthalate (DINP) & Di-iso-decyl phthalate (DIDP)
DIOCTYL PHTHALATE (DOP)
DOP (Di-sec-Octylphthalate) is the most widely used general purpose plasticizer for the manufacture of flexible plastics (especially with PVC). It is insoluble in water and has a good stability to heat and ultraviolet light, a broad range of compatibility, and excellent resistance to hydrolysis.
- Does DOP plasticizer percentage affect limiting oxygen index and thermal stability?
- The effect of DOP plasticizer percentage on limiting oxygen index and thermal stability of plasticised PVC was investigated in this paper. DOP was added PVC with various quantities (20, 30, and 50) pphr. LOI and thermal stability instruments used for estimating LOI and thermal stability of plasticised PVC as a function to DOP percentage.
- Does DOP increase the thermal stability of plasticised PVC?
- The results showed that the thermal stability of plasticised PVC was improved by increasing DOP percentage, but in the same time has a reverse behavior where the LOI decreases as the DOP percentage increases. Thermal stability test at temperature 190°C and 200°C respectful. Specifications of PVC S-5070 (Ongrovil ® ) .
- Is adipate a good plasticizer?
- The new environmentally friendly plasticizer has good compatibility with PVC and high thermal stability. The effectiveness of the plasticizing action of adipate based on the glass-transition temperature was 132.2 °C in relation to pure PVC and 7.7 °C in comparison to compounds based on DOP.
- Is DOP a good plasticizer?
- DOP has optimal plasticizing properties at a low cost and is the main standard by which other plasticizers are compared. However, due to the migration of DOP from polymer products and its identified toxicity, the share of consumption of this plasticizer tends to gradually decrease.
- Which plasticizer is most stable?
- Based on the results of binding energy calculation, it can be judged that the most stable of the four plasticizers in combination with the base asphalt is TOTM, followed by DOA and DOP, with ATBC being the worst. Fig. 9. Binding energy of four plasticizers with asphalt at five temperatures. 3.3.2.
- What is Eastman DOP plasticizer?
- Home ... Eastman™ DOP Plasticizer (Bis (2-Ethylhexyl) Phthalate) is a light colored, low volatility, odorless liquid. It is the most widely used all-purpose plasticizer offered by Eastman™ for use with polyvinyl chloride (PVC) resins. It is insoluble in water and has a viscosity of 56 cP at 25°C.
