Plastomoll DOA TDS
TI/N-CPN/IP Plastomoll DOA / June 2025 Page 3 of 4 Plastomoll DOA Description Plastomoll DOA is a highly efficient plasticizer which imparts excellent low temperature flexibility and resistance to impact to the base resin. For these reasons it finds wide use in polymeric systems based on vinyl, nitrocellulose and rubber.
Alternative plasticizer - Metalest DOA | ChemSec Marketplace
Description Dioctyl adipate DOA plasticizer (Bis (2-Ethylhexyl) Adipate) is a light colored, oily liquid generally used as a plasticizer for PVC. It can be used alone or blended with other plasticizers. In PVC, DOA features flexibility at low temperatures, good electrical properties, good resistance to weathering, and good stability to heat.
Advanced Medical-Grade Compounds - PVC plasticizers - Tekni-Plex
DOA, dioctyl adipate also called DEHA di (2-ethylhexyl) adipate is a diester of adipic acid and 2-ethylhexanol. TOTM trioctyl trimellitate is a triester of trimellitic acid with 2-ethyl hexanol Due to differences in chemistry and molecular weight subtle differences in compatibility with PVC exist.
Adimoll DB - plasticizer | ChemSec Marketplace
Adimoll DB - plasticizer Alternative What is an alternative/evaluated alternative? Summary DBA - dibutyl adipate - phthalate free plasticizer alternative. Description Polymer auxiliaries. Manufacturing of plastics. PVC Plasticizers for polymeres. Chemical synthesis organic solvent. Chemical Industry. Plastic- and Rubberpolymers.
Eects of molecular design parameters on plasticizer
between common MDPs of plasticizers and all their key performance metrics (compatibility, e-ciency, and permanence) is needed in order to better guide the continued search and development of green and eective alternative plasticizers. Molecular modeling and simulation can be a valuable tool for handling the current chal-lenges of plasticizers.
- Which plasticizer has the best plasticizing effect on PVC and PLA films?
- According to the above Tg results of plasticized PVC and PLA films, the AcMAE-C6 plasticizer exhibited the best plasticizing effect on PLA films as well as PVC films, and this phenomenon seems to be due to the structure of AcMAE-C6 having the best compatibility with both PVC and PLA.
- How much weight does a PVC film lose with a plasticizer?
- The weight loss percentages of the PVC films with DEHP and DOA commercial plasticizer were 0.07 wt.% and 0.57 wt.%, respectively. In general, leaching property depends on the molecular weight of a plasticizer, compatibility and interaction strength between a plasticizer and a polymer matrix.
- Which plasticizer has the lowest TG value?
- The lowest Tg value (28.8 °C) was observed in the PLA film containing the AcMAE-C6 plasticizer, and the Tg value of the PLA film with AcMAE-C4 was 38.0 °C, lower than those of the PLA films containing DOA (53.1 °C) and DEHP (53.6 °C).
- What plasticizers are used for PVC?
- Some of the most common plasticizers that are currently being utilized for PVC are aromatics and aliphatic esters, typically di (2-ethylhexyl) phthalate (DEHP) and dioctyl adipate (DOA). There have been concerns over the use of DEHP, as it negatively impacts human health and the environment .
- Which plasticizer has the lowest storage modulus?
- The lowest storage modulus value (0.03 GPa) was observed for PLA/AcMAE-C6, and the storage modulus (0.69 GPa) of PLA/AcMAE-C4 was also lower than those of PLA/DOA (1.29 GPa) and PLA/DEHP (1.59 GPa) film. PLA films containing the other plasticizers showed similar storage moduli to those containing the commercial plasticizer DOA and DEHP. Fig. 4.
- Which plasticizer is best for PVC film elongation?
- By comparing the percent elongation of PVC films containing different plasticizer types, AcMAE-C6 is found to be the most effective plasticizer (780%), followed by AcMAE-C8 (757%), AcMAE-iC8 (729%), AcMAE-iC13 (595%), and AcMAE-C4 (477%).
