High performance plastics | Ensinger
High performance plastics typically have a permanent operating temperature of more than 302°F. It is this material class that brings the superior properties of polymers - such as sliding friction characteristics, weight saving and chemical resistance - to bear, especially at high permanent operating temperatures.
Plasticizers: Types, Uses, Classification, Selection & Regulation
A primary plasticizer enhances elongation, softness and flexibility of polymer. They are highly compatible with polymers and can be added in large quantities. For example: up to 50% of vinyl gloves are made up of plasticizers, which make the PVC flexible and soft enough to wear.
Existing Technology Can Solve Most Plastic Pollution Problems!
Of the 8.7 billion tons of plastic waste produced between 1950 and 2025, only 11% has ever gone through recycling. In 2025 — the most recent year for which a breakdown is available — more than
High Impact Polystyrene Properties & HIPS Plastic Uses
About High Impact Polystyrene. High Impact Polystyrene (HIS) is a low cost, tough plastic that is easy to thermoform and fabricate. HIS is often used for countertop point of purchase displays and indoor signs where ease of fabrication is essential. Length, width, thickness, and diameter tolerances vary by size, by manufacturer, brand, and grade.
Insulating Materials List - Professional Plastics
centigrade and with superb high voltage breakdown. It is an excellent choice for standardization since it outperforms many other materials. NORYL (PPO): Noryl EN265’s overall physical properties are excellent: low moisture absorption and heat resistance of 265 degrees F at 264psi combine to make Noryl a truly high performance material at very
- What is a primary plasticizer?
- A primary plasticizer enhances elongation, softness and flexibility of polymer. They are highly compatible with polymers and can be added in large quantities. For example: up to 50% of vinyl gloves are made up of plasticizers, which make the PVC flexible and soft enough to wear.
- Do polystyrene modifiers and Diester-phthalate plasticizers affect surface hardness?
- We study the influence of the nature of polystyrene modifiers and diester-phthalate plasticizers on the surface hardness, Vicat softening point, degree of release of the plasticizer, and elastoplastic properties of polyvinyl-chloride plastics and their composites.
- What are plasticisers used for?
- Plasticisers are some of the most common plastic additives incorporated into polymers during manufacturing, and are used to enhance polymer flexibility, elasticity and plasticity (Geyer et al., 2017).
- What are plasticizers & how do they work?
- Plasticizers are non-volatile organic substances (mainly liquids) added into a plastic or elastomer. They are also usually cheaper than other additives. They improve the following properties of the polymers: Plasticizers increase the flow and thermoplasticity of a polymer.
- What is a polymeric plasticizer?
- Polymeric plasticizers are typically made from aliphatic dibasic acids such as adipic acid and diols. They are primarily valued for their permanence. These plasticizers are generally classified as polyesters, not adipates. Many have low solvency for PVC and high viscosity. Both these factors can make processing f-PVC compounds difficult.
- What is a plasticizer chemistry?
- Plasticizers are the most used additives in the plastics industry. They are generally available as non-volatile, colorless liquids. They improve the properties of the polymer. With several plasticizer chemistries available in the market choosing the right one can be daunting. In this guide, you will read more about:
