Current Status of Plasticizer Research | SpringerLink
DPHP plasticization grants PVC with a better low-temperature tenacity than DOP and with a lower brittle temperature than DIDP, indicating the better low-temperature performance of DPHP. Based on its high mechanical performance, DPHP can be used in PVC as a primary plasticizer.
DOA Plasticizer | Eastman
Product description. Eastman DOA plasticizer (Bis (2-Ethylhexyl) Adipate) is a light colored, oily liquid generally used as a plasticizer for PVC. It can be used alone or blended with other plasticizers, such as DOP or DOTP. In PVC, Eastman DOA features flexibility at low temperatures, good electrical properties, good resistance to
Synthesis and application of high-stability bio-based
In this article, we prepared a high-stability bio-based plasticizer derived from ricinoleic acid through a four-step reaction and blended it with PVC to prepare samples. Taking commercial DOP and DOA as a comparison, we analyzed the mechanical properties, thermal stability, and migration resistance of plasticized PVC films.
Plasticizers – Technical Products Inc of Ohio
DOA plasticizer (Bis (2-Ethylhexyl) Adipate) is a light colored, oily liquid generally used as a plasticizer for PVC. It can be used alone or blended with other plasticizers, such as DOP or DOTP. In PVC. DOA features flexibility at low temperatures, good electrical properties, good resistance to weathering, and good stability to heat.
Plasticizers: Types, Uses, Classification, Selection & Regulation
A primary plasticizer enhances elongation, softness and flexibility of polymer. They are highly compatible with polymers and can be added in large quantities. For example: up to 50% of vinyl gloves are made up of plasticizers, which make the PVC flexible and soft enough to wear.
- Is a-ODL a plasticizer?
- The potential plasticizing mechanism of the plasticizer was described according to the molecular structure between PVC and A-ODL. In this work, A-ODL were blended with PVC to evaluate the plasticizing behaviors and compared with those of DOA, DOP and DOTP.
- Which plasticizer is used to make polyvinyl chloride (PVC) films?
- Subsequently, ricinoleate plasticizer, commercially available dioctyl phthalate (DOP), and bis (2-ethylhexyl) adipate (DOA) were added to prepare polyvinyl chloride (PVC) films for performance comparison.
- Which plasticizer is most stable after 10 d?
- After 10 d, the migration trend of all samples had been stabled, it showed that the traditional plasticizer like DOP, DOTP and DOA had basically move out from the PVC matrix in non-polar environment due to their own single structure, while the PVC plasticized with A-ODL showed the best stability in all the environment.
- Are plasticizers essential additives in flexible PVC products?
- Currently, plasticizers are indispensable additives in flexible PVC products, with global annual production exceeding 6.4 million tons, more than 75% of which consists of phthalate-based plasticizers .
- Are plasticizers a good choice for PVC?
- According to the statistics, the total output of PVC in the world was over 49.0 million tons in 2019 . However, as a rigid polymer, pure PVC have certain drawbacks without any additives . Therefore, plasticizers are generally blended to improve the mechanical properties and thermal stability of PVC materials , .
- Who makes ATS plasticizers?
- ATS chemical division produces a wide range of plasticizers specifically used by Rubber, PVC wires, Shoes, Inks, Coating and Plastics Industry. With a designed capacity of over 35,000 TPA, the superior technology added with greater expertise of our team makes our plasticizers best in the market in terms of quality, clarity and purity.
