Admixtures | Super Plasticizers | Superflo 2000SCC - RussTech
RussTech carries a full line of super plasticizing concrete admixtures including ones that contain the new polycarboxylate technology. These high range water reducers have been specifically designed to increase strength while maintaining extended flowability at lower water to cementitious ratios in the concrete mix.
Admixtures | Super Plasticizers - RussTech
Super Plasticizers RussTech carries a full line of super plasticizing concrete admixtures including ones that contain the new polycarboxylate technology. These high range water reducers have been specifically designed to increase strength while maintaining extended flowability at lower water to cementitious ratios in the concrete mix. SuperFlo 443
SikaPlast-398 SF | Super Plasticizers
SikaPlast-398 SF is a 3rd generation polymer based high performance superplasticizer for producing soft consistency concrete. SikaPlast-398 SF meets the requirements of ASTM C494 type D & G. SikaPlast-398 SF conforms to type G when used at 0.8 - 1.0% dosage, depending on cement type used. SikaPlast-398 SF combines different modes of actions.
Superplasticizer
Superplasticizer. Superplasticizers ( SPs ), also known as high range water reducers, are additives used in making high strength concrete. Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. Superplasticizers allow reduction in water content by 30% or more.
Superplasticizer for High Strength Concrete - ResearchGate
The general trend seen in both the viscosity measurements and spread test is that the high composition superplasticizer produced the lower viscosity and highest spread, followed by the medium...
- What is a superplasticizer used for?
- Superplasticizers (SPs), also known as high range water reducers, are additives used for making high strength concrete or to place self-compacting concrete. Plasticizers are chemical compounds enabling the production of concrete with approximately 15% less water content. Superplasticizers allow reduction in water content by 30% or more.
- What is a super plasticizer?
- Classification of Super Plasticizers 3. Uses. Super plasticizers are also called high range water reducers. They are of recent origin and relatively are more effective type water reducing admixtures. They were developed in Japan and Germany during 1960 and 1970 respectively. Chemically they are different from normal plasticizers.
- How a super plasticizer can be used to make concrete?
- With the use of super plasticizers, flowing concrete could be produced with the water/cement ratio as low as 0.25 or even less. The strength of such concrete was found 120 MPa (1200 kg/cm 2) or more. The use of super plasticizers also made it possible to use the fly ash, slag and silica fume to produce high quality concrete.
- How many types of superplasticizers are there?
- Superplasticizers are of four types as Sulphonated Naphthalene Formaldehyde (SNF), Sulphonated Melamine Formaldehyde (SMF), Sulphonated Acetone Formaldehyde (SAF), and Polycarboxylate Ether (PC). SNF is obtained from coal tar/petroleum naphthalene where it is converted into sulphonated at high temperature in concentrated sulfuric acid.
- What is polycarboxylate superplasticizer (PCE)?
- Polycarboxylate superplasticizer (PCE), the third generation of high-performance superplasticizer, follows the development of ordinary plasticizers and superplasticizers. It significantly reduces water content while enhancing concrete's workability, strength, and durability.
- Which superplasticizer admixture is better?
- Based on the findings, out of three superplasticizers, PC—based admixture showed a better improvement in strength aspects compared to other mix. Compressive strength of UHPC (a) SNF admixture (b) SMF admixture (c) PC admixture
