Technical Information
compatible with all of the monomeric plasticizers commonly used in PVC. Palatinol N is almost insoluble in water. Physical data The following physical data were measured in the BASF SE laboratories. They do not represent any legally-binding guarantee of properties for our sales product. Molar mass 418.6 g/mol Pour point (DIN ISO 3016) -54 °C
reg
carbon steel, e. g. A 283 grade. If severe demands are imposed on the product quality, we recommend that it be stored in tanks constructed from stainless steel, e. g. AISI TP 316 Ti (German steel No. 1.4541) or aluminum (AlMg
Eastman 168 Non-Phthalate Plasticizer | Eastman
Product description. Eastman 168 non-phthalate plasticizer is an excellent general purpose non-orthophtalate plasticizer with performance equal or better than most ortho -phthalate plasticizers. It offers good performance properties, excellent low temperature flexibility, resistance to extraction by soapy water, and excellent non-migration
Cargill Plasticizers | Bio-Based Plasticizers | Cargill
Vikoflex Plasticizers. For customized applications, Vikoflex plasticizers provide unique characteristics to help PVC products perform at a greater range.. Cargill’s Vikoflex plasticizer is a bio-based plasticizer that delivers sustainability benefits and is used in custom applications such as plasticization, stabilization, acid scavenging and viscosity.
Bulk Handling of Paraplex and Plasthall Plasticizers
steel tanks are the most versatile and provide maximum flexibility for installation. Steel storage tanks are satisfactory if certain precautions are taken. Steel tanks should be sand-blasted and immediately wiped down with clean rags wet with a low-viscosity plasticizer that provides an oil film to protect the cleaned steel before rusting can
- What is a polymeric plasticizer?
- Polymeric plasticizers are typically made from aliphatic dibasic acids such as adipic acid and diols. They are primarily valued for their permanence. These plasticizers are generally classified as polyesters, not adipates. Many have low solvency for PVC and high viscosity. Both these factors can make processing f-PVC compounds difficult.
- What are natural product type plasticizers?
- Vegetable oil derivatives are the most widely used natural product type plasticizers. Products consisting of triglyceride esters of unsaturated fatty acids (e.g., soybean oil, linseed oil) in which the double bonds in the fatty acid residues have typically been epoxidized have been commercial products for decades.
- What is a primary plasticizer?
- A primary plasticizer enhances elongation, softness and flexibility of polymer. They are highly compatible with polymers and can be added in large quantities. For example: up to 50% of vinyl gloves are made up of plasticizers, which make the PVC flexible and soft enough to wear.
- What is a plasticizer chemistry?
- Plasticizers are the most used additives in the plastics industry. They are generally available as non-volatile, colorless liquids. They improve the properties of the polymer. With several plasticizer chemistries available in the market choosing the right one can be daunting. In this guide, you will read more about:
- How are plasticizers classified?
- Plasticizers are classified based on their chemical composition. It is important to understand the influence of structural elements on the properties of plasticizers and their effect on base polymers. For example, the presence of elements like alcohols in a homologous series of phthalates, and adipates.
- What are plasticizers & how do they work?
- Plasticizers are non-volatile organic substances (mainly liquids) added into a plastic or elastomer. They are also usually cheaper than other additives. They improve the following properties of the polymers: Plasticizers increase the flow and thermoplasticity of a polymer.
