Plasticizer Enhancement on the Miscibility and
The water absorption test shows that the water absorption rate increases with starch content and the wear rate recorded sample A (92% P/8% C) as the highest. The high miscibility projected was...
[PDF] Plasticizer Enhancement on the Miscibility and
The result of the fractured surface morphology showed good miscibility of the blending, which accounted for the good mechanical properties recorded in the study. In previous research, a polylactic chitin starch composite was prepared without the use of a solvent to enhance the miscibility. In this study, a polylactic acid (PLA) chitin starch composite was produced with chloroform as a
Release Enhancement by Plasticizer Inclusion for Amorphous
DSC was used to evaluate the API:plasticizer miscibility and the plasticizing effect. All plasticizers produced a notable reduction in the T g of ATZ and LED suggesting miscibility. The citrate plasticizers produced a similar extent of T g depression of around 30°C (Table II) for ATZ and 50°C for LED (Table III).
Plasticizer Enhancement on the Miscibility and
Plasticizer Enhancement on the Miscibility and Thermomechanical Properties of Polylactic Acid-Chitin-Starch Composites by Indra Surya 1, N. G. Olaiya 2,*, Samsul Rizal 3, Ikramullah Zein 4, N. A. Sri Aprilia 5, M. Hasan 6, Esam Bashir Yahya 7, K. K. Sadasivuni 8 and H. P. S. Abdul Khalil 2,* 1
Plasticizer Enhancement on the Miscibility and
Plasticizer Enhancement on the Miscibility and Thermomechanical Properties of Polylactic Acid-Chitin-Starch Composites Authors Indra Surya 1 , N G Olaiya 2 , Samsul Rizal 3 , Ikramullah Zein 4 , N A Sri Aprilia 5 , M Hasan 6 , Esam Bashir Yahya 7 , K K Sadasivuni 8 , H P S Abdul Khalil 2 Affiliations
- Does plasticizer enhance polylactic acid-chitin-starch composite properties?
- Plasticizer Enhancement on the Miscibility and Thermomechanical Properties of Polylactic Acid-Chitin-Starch Composites.
- Are polymeric plasticizers miscible with PVC?
- One alternative to this kind of problem is the use of polymeric plasticizers. Polyester/PVC miscibility studies , have shown that some polymeric polyesters are to some extent miscible with PVC, and other studies have shown that some polyurethanes are also miscible with PVC.
- What is low-molecular-weight plasticizer?
- Low-molecular-weight plasticizer is one of the major additives used in PVC compounding. The addition of plasticizers to a PVC formulation decreases many mechanical properties of the PVC product (hardness, tensile strength, modulus, etc.); however, low-temperature flexibility, elongation, and the ease of processing are all improved.
- How is stabilizer added to PVC?
- Before processing the PVC, 4 parts of stabilizer were added to 100 parts of PVC by using a Haake laboratory twin screw extruder TW 100 Rheocord 9000. The composition of these blends is reported in Table 1. The thermal profile was 140–150–160–170 °C for all blends. The screw speeds were 30, 60 and 100 rpm.
