ADVA 198 Data Sheet | Resource | GCP Applied Technologies
ADVA 198 superplasticizer addition rates can vary with type of application, but will normally range from 2 to 15 fl oz/100 lbs (130 to 980 mL/100 kg) of cementitious. In most instances, the addition of 3 to 6 fl oz/100 lbs (195 to 375 mL/100 kg) of cementitious will be sufficient.
SikaMix PL-100 | Plasticizers & Compaction Aid | Sika Canada
Advantages. SikaMix PL-100 is an integral concrete densifying admixture that acts as a cement dispersant and reduces the use of water. Some of its benefits are: Machine productivity will be increased by more rapid filling of form and mold boxes. The internal lubricating properties of SikaMix PL-100 reduce the wear on machinery and extend
Delay Set Superplasticizer | Fritz-Pak | Concrete Admixtures
Supercizer 7. Fritz-Pak’s Supercizer 7 is not only a premium superplasticizer, it is a delay set superplasticizer. This powerful product offers the benefits of both a high-range water reducer and a set retarder. It is recommended for use in a variety of formwork, including ICF, to provide the correct flow and strength while also reducing the
Sikament NN | Superplasticizers
High Range Liquid Water Reducer / Superplasticiser Admixture For Concrete. Sikament NN is a highly effective dual action liquid superplasticiser for the production of high slump concrete or as a substantial water reducing agent. Sikament NN provides the following properties: As a Superplasticizer: Workability is greatly improved.
ADVA 140M Data Sheet | GCP Applied Technologies
Typical addition rates are: High-range water reducer—9 to 16 oz/cwt (590 to 1040 mL/100 kg) Mid-range water reducer—5 to 9 oz/cwt (325 to 590 mL/100 kg) Optimal addition rates will depend on other concrete mixture components, job conditions, and desired performance characteristics.
- What is acrylic super plasticizer?
- Acrylic super plasticizer is a high-performance chemical admixture designed for use in concrete admixtures, enhancing workability and durability while reducing water content. As a leading concrete admixture manufacturer, Vinati Organics recommends following the manufacturer’s guidelines for optimal performance and quality.
- What is a superplasticizer & how does it work?
- As a superplasticizer, it enables the production of high-strength concrete with normal workability but reduced water content. The chemical admixtures used in this product imparts extreme fluidity to the concrete additives, which facilitates rapid placement of concrete.
- What are the characteristics of super plasticizer?
- Super plasticizer provides an excellent development of early strength. Many important characteristics of concrete are influenced by the ratio (by weight) of water to cementitious materials (w/cm) used in the mixture. By reducing the amount of water. The cement paste will have higher density, which result in higher paste quality.
- What is globmarble super plasticizer?
- GlobMarble super plasticizer is especially optimized for plastification and water reduction of cementitious construction materials. Super plasticizer provides an excellent development of early strength. Many important characteristics of concrete are influenced by the ratio (by weight) of water to cementitious materials (w/cm) used in the mixture.
- How to mix super plasticizer?
- You can also add Super plasticizer to the water 10-15 minutes prior to casting (until plasticizer dissolves in water), then mix with dry ingredients. Please note: Concrete minimum mixing time is 3 minutes with mechanical drill or 5 minutes with mortar mixer (it takes a few minutes until Super Plasticizer absorbs into the cement and start reaction).
- How much superplasticizer should be dispensed per 100 kg of cement?
- Superplasticizer is normally dispensed at a rate of 0.3 -0.5 kg per 100 kg of cement. ∙ This chemical admixture should preferably be added directly to the water before mixing with the wet aggregate.
